Basic Baseboard Heater Cover Panel Baseboard Heater Cover

Basic Baseboard Heater Cover Panel Baseboard Heater Cover 36" (3.125 x 36 x 6.75)

/ 15

Basic Baseboard Heater Cover Panel

SKU: VCU-BC001-36-WHT

Ships out in 1 to 3 business days.

A galvanized steel cover that goes straight over a tired hot-water baseboard heater — no plumbing, no removing the heating element. Basic is the entry point in the Baseboarders range: the same panel profile and the same lifetime warranty as the rest, in four standard lengths and at the lowest price of any line.

Intended for hydronic — hot water — baseboard heaters. Electric baseboard heaters run at a higher surface temperature, so take care before fitting a cover to one. When using any electrical appliance, follow basic precautions to reduce the risk of fire, electric shock and injury.

Goes Over What Is There

The cover hangs on the heater’s existing back plate. The element stays where it is, the pipework is untouched, and the old dented front simply disappears.

Lowest Price In The Range

At every length Basic shares with the other lines, it is the least expensive — about 20 percent under Premium and about a third under Elliptus.

Galvanized Steel

Steel rather than aluminum or plastic, so it takes knocks from a vacuum or a chair leg without denting the way a thin original front does.

Paint It If You Want

Ships in a semi-gloss white powder coat that suits most trim as it is, and takes paint if you would rather match it to the wall.

Lifetime Warranty

The same lifetime warranty Baseboarders puts on its Premium and Elliptus lines. Paying less here does not buy you less cover.

Add Only What You Need

End caps, couplers and a wall bracket are added in Custom Options above, so a single straight run costs no more than the panel itself.

Sizing

Four standard lengths. Every panel is the same height and depth — only the length changes — so a long wall is made up from several panels joined with couplers.

Panel length	In feet	Depth × height
36"	3 ft	3-1/8" × 6-3/4"
48"	4 ft	3-1/8" × 6-3/4"
60"	5 ft	3-1/8" × 6-3/4"
72"	6 ft	3-1/8" × 6-3/4"

Need a length that is not on this list, or a panel cut to a specific size? Call 888-622-4225 or email sales@ventcoversunlimited.com — custom cuts are not orderable from this page.

In the room

Basic baseboard cover running along a wall above a wood floor

Basic baseboard cover turning a corner in a living room

A long run of Basic baseboard cover down a hallway

Accessories

Three accessories are added in Custom Options above, alongside the panel. Basic accessories fit Basic panels only — they are not interchangeable with the Premium, Premium Tall or Elliptus lines.

Basic closed end cap for a baseboard heater cover — **Closed end cap**
from $23.95

Coupler that joins two Basic baseboard cover panels — **Coupler**
from $18.95

Wall bracket that supports a baseboard cover where there is no back plate — **Wall bracket**
add $3.95

End caps — left and right

Close off the end of a run where the copper pipe turns down into the floor or back into the wall. Left and right are defined as your left and right while facing the heater. A run that finishes at a wall on both ends needs one of each.

Couplers

Overlap the joint where two panels butt together, so a wall longer than 6 ft reads as one continuous run. Count one coupler for each joint — three panels in a row need two.

Wall bracket

For new construction, or where the heater’s original back plate has been removed or is shorter than 7-1/4". The bracket carries the panel instead. It is the one accessory that fits every Baseboarders panel, not just Basic.

Closed end cap fitted to the end of an installed Basic baseboard cover — An end cap closing the end of a run

Corners are not orderable from this page. If your run turns a corner, call 888-622-4225 or email sales@ventcoversunlimited.com before you order the panels, so the corner pieces and the panel lengths can be worked out together.

Which Baseboarders line?

All four lines are galvanized steel in semi-gloss white with a lifetime warranty. What separates them is the range of lengths, the height, and the shape of the face.

Line	Height	Lengths
Basic (this one)	6-3/4"	3, 4, 5, 6 ft
Premium	6-3/4"	2, 3, 4, 5, 6, 7 ft
Premium Tall	8-3/4"	2, 3, 4, 5, 6, 7 ft
Elliptus	6-3/4"	2, 3, 4, 5, 6, 7 ft

Choose Premium if you need a 2 ft or 7 ft panel, Premium Tall if your existing heater is taller than a 6-3/4" cover will hide, and Elliptus if you want its curved face rather than the flat profile shared by the other three. Otherwise Basic does the same job for less. More on the range at the Baseboarders brand page.

Specifications

Brand and lineBaseboarders — Basic
MaterialGalvanized steel
FinishSemi-gloss white powder coat, paintable
Panel lengths36", 48", 60", 72"
Depth × height3-1/8" × 6-3/4"
Intended forHydronic (hot water) baseboard heaters
Accessories on this pageClosed end cap, coupler, wall bracket
Accessory fitBasic accessories fit Basic panels only
WarrantyLifetime

FAQs

Decorative resin covers are designed for wall and ceiling applications only — they are not rated for floor use. They're lightweight enough to mount safely overhead and decorative enough for walls where you want more visual detail than a stamped metal grille. If you need a floor register, our wood, metal, and cast iron options are built to be walked on.

Resin covers don't rust like metal, don't splinter like wood, and are significantly lighter than either — which makes them ideal for ceilings. They're formulated to handle the thermal cycling of central air and heat, so they won't warp or crack from temperature changes. Urethane resin is also stable in moisture-rich environments like bathrooms, where metal can corrode and wood can swell.

Yes — unfinished resin covers can be painted to match your walls or trim. However, covers that have already been painted at the factory are non-returnable. If you plan to paint, order an unpainted cover, apply your chosen color after testing on a sample, and install once dry. Standard spray paint adheres well to resin; no special primer is required for most colors.

Yes. Our decorative resin covers are available in standard sizes and hard-to-find dimensions — the same custom sizing program that covers wood and metal also applies to resin. If your duct opening doesn't match a listed size, contact us with your measurements and we'll confirm what's available. Allow approximately 6 weeks for custom resin orders.