Madelyn Carter Roman Black Vent Covers (Cast Aluminum) Vent Cover

Madelyn Carter Roman Black Vent Covers (Cast Aluminum) Vent Cover 2 x 10 (Overall Size: 3.75 x 11.5)

Madelyn Carter Roman Black Vent Covers (Cast Aluminum) Vent Cover

Madelyn Carter Roman Black Vent Covers (Cast Aluminum)

Madelyn Carter Roman Black Vent Covers (Cast Aluminum) Vent Cover

/ 9

Madelyn Carter Roman Black Vent Covers (Cast Aluminum)

SKU: MCK-210-TXB-R

Ships out in 1 to 3 business days.

The Madelyn Carter® Roman is a cast aluminum floor and wall vent cover with a traditional geometric face pattern in textured black, an attached all-metal damper, and mounting clips included. It comes in nine duct opening sizes, from 2" x 10" to 6" x 14".

Traditional Roman Design

A traditional geometric face pattern that reads as a finish detail rather than an HVAC part, on a floor or a wall. Part of the Madelyn Carter Collection, hand-selected by Vent Covers Unlimited.

Textured Black Finish

A classic flat black, textured to give the appearance of cast iron, that blends easily with existing décor and black hardware.

Cast Aluminum

Strong, long-lasting, and resistant to rust and to dents from shoes and furniture.

Attached All-Metal Damper

Every size comes with an attached all-metal damper to control air flow: open it up or close it down. It is not directional.

Floor or Wall

Mounting spring clips are included for a floor or wall installation with an ultra-snug fit.

Sizes & Dimensions

Order by duct opening size. Remove your existing cover and measure the duct opening — the width (short side) and length (long side) of the hole, not your old cover. A 4" x 10" cover fits a duct opening 4" wide by 10" long; its overall size is 5.25" W x 11.5" L.

Remove your current floor or wall vent cover.
Measure the duct opening: width (short side) and length (long side).
Order the cover that matches your duct opening size.

Duct opening	Overall width	Overall length
2" x 10"	3.75"	11.5"
2" x 12"	3.75"	13.5"
2" x 14"	3.75"	15.5"
4" x 10"	5.25"	11.5"
4" x 12"	5.25"	13.5"
4" x 14"	5.25"	15.5"
6" x 10"	7.25"	11.5"
6" x 12"	7.25"	13.5"
6" x 14"	7.25"	15.5"

Order by duct opening size. The overall size is the face of the cover, which overlaps the opening.

AI Generated Review Summary

Madelyn Carter Roman Black Vent Covers offer a timeless design with a textured flat black finish that resembles cast iron. These covers are durable, rust-resistant, and feature adjustable dampers for customizable airflow control. They are made from strong cast aluminum and are designed to match any modern decor seamlessly.

Summary topics

Product Quality (24%): Many customers loved the great quality of the product, mentioning it multiple times in their reviews.
Product Fit (11%): Customers expressed appreciation for the perfect fit of the product, which was mentioned multiple times in the reviews.

Review topics: ["fit","quality","look","vent","value","finish","style","appearance","covers","registers"].

Review highlights

"What can make your home appearance look real grand and stylish, of course with Victorian style Architect." — Greg D.
"Covers look great and are good quality." — Brian N.
"Looks amazing, great quality for price and easy to install." — Anonymous

Reviews

Thank you

"Great service and quality product delivered. Love the color and fit perfectly"

— David U. (5/5)

"Built very well!"

— Noah (5/5)

On time and look great

"On time and look great"

— Thad W. (5/5)

Decent quality fair. . .

"Decent quality but the mechanism for opening louvers is quite difficult. Other problem is the holes in the vent are too big. That being said. . they are very nice looking and ypu hardly ever close vents anyways right?"

— Preston T. (3/5)

Solid, good. . .

"This vent cover exceeded my expectations. I wasn’t sure about black (on a light wood floor) even though I’m replacing original black solid cast-iron air covers/returns in a 100yo home, but seeing them in the flooring far exceeds my expectations. They’re sturdy, go in well, are surprisingly elegant and beautiful, and are sturdy enough to clearly hold up long-term."

— Brenna B. (5/5)

Nice!

"Switched from dingy old builders vent covers to these new black ones - what a difference they make!! Highly recommend!"

— Eric B. (5/5)

Mediocre

"Good quality feeling frame and thick metal with a uniform finish. Unfortunately the lever to open and close the vent is very cheap and sticky. It takes just the right amount of force in just the right direction to open and close. Contractor grade at best."

— Yosef S. (3/5)

Great looking and well. . .

"Easy to install, looks great, and immediately improved the look of my floors. I wish I would have upgraded the former floor vent covers a long time ago."

— JEN G. (5/5)

Amazing

"Looks and fit grate! See what I did there. I like the functionality of the register cover and the finish is perfect."

— Brian (5/5)

All metal and. . .

"We are upgrading the floor vent covers in our old house and these look beautiful and feel solid compared to the original ones in the house. The vent flaps take a bit of force to move to the preferred angle but that means they won’t close shut easily if one of the cats sits on it. I wish the included wall clips helped with reducing the loose wiggly aspect in some of the larger floor cutouts but we will use a foam strip to make them snug."

— Annie B. (5/5)

Q&A

FAQs

Decorative resin covers are designed for wall and ceiling applications only — they are not rated for floor use. They're lightweight enough to mount safely overhead and decorative enough for walls where you want more visual detail than a stamped metal grille. If you need a floor register, our wood, metal, and cast iron options are built to be walked on.

Resin covers don't rust like metal, don't splinter like wood, and are significantly lighter than either — which makes them ideal for ceilings. They're formulated to handle the thermal cycling of central air and heat, so they won't warp or crack from temperature changes. Urethane resin is also stable in moisture-rich environments like bathrooms, where metal can corrode and wood can swell.

Yes — unfinished resin covers can be painted to match your walls or trim. However, covers that have already been painted at the factory are non-returnable. If you plan to paint, order an unpainted cover, apply your chosen color after testing on a sample, and install once dry. Standard spray paint adheres well to resin; no special primer is required for most colors.

Yes. Our decorative resin covers are available in standard sizes and hard-to-find dimensions — the same custom sizing program that covers wood and metal also applies to resin. If your duct opening doesn't match a listed size, contact us with your measurements and we'll confirm what's available. Allow approximately 6 weeks for custom resin orders.